How to Access WiFi using Ethernet Port or LAN Port | WiFi to Wired

How to Access WiFi using Ethernet Port or LAN Port | WiFi to Wired


Hello friends welcome to my channel local
guy. Situation 1
there are many devices which do not have Wi-Fi hardware in it or Wi-Fi hardware not working
and only way to access the internet is via Ethernet or lan port. Devices like laptop or desktop or server with
Wi-Fi hardware not functional or Wi-Fi hardware not working. In this case how to access the available Wi-Fi
internet via Ethernet port. Situation 2
you have wireless dongle and you are sharing the internet via Wi-Fi hotspot but your device
like desktop, Television, game console or any other devices which do not have Wi-Fi
hardware and only way to access internet is Ethernet port. In these type of situations how to connect
to internet with available Wi-Fi network via Ethernet or lan port. so in this video I’ll show you how to access
internet from wireless i.e. Wi-Fi via wired lan cable to Ethernet port. Before going further subscribe to my channel and press the bell icon Here is my dlink dir 505 router. I will use this as a Wi-Fi repeater.it has
lan port from which I’ll access the Wi-Fi internet from my primary Wi-Fi network to
desktop/laptop Ethernet port. You can use any other Wi-Fi router which has
Ethernet port to access internet from Wi-Fi network to lan Ethernet port. Here internet will flow through wireless to
wired lan cable. first of all we have to configure the router
as a repeater for that we need to access the router.so first power on the router and as
given on the router itself choose the Wi-Fi network name here it is dlink-172E and password
given is nlkse57042. After successfully connected to Wi-Fi network
open the network and sharing center and click Wi-Fi and click on status. Note down the default gateway address. Here it is 192.168.0.1 which is our router
ip. Now open the browser and type the default
gateway ip address to access the router settings. Now we will connect this router to our primary
Wi-Fi router. Click scan to list the available Wi-Fi network
ssid name and choose your primary Wi-Fi network name and click connect. Here my primary Wi-Fi network ssid is Falcon_1 Enter the password of your primary Wi-Fi network. Here it is time0000. You can also change the repeater Wi-Fi network
name and password. Here i have changed Wi-Fi ssid to falcon_3
and password is same time0000. Now click save and reboot the router. Now connect the one end of the lan cable to
router and other end to your laptop/Desktop or any other device which has lan Ethernet
port. Here i have connected lan cable to my laptop. Now open network and sharing center and click
Ethernet and click on properties. On properties click on ipv4 and choose the
obtain ip and dns address automatically then click ok. That’s it now you can able to access the
internet from Wi-Fi to wire lan cable.

3 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *