Learn about Device Assembly on the AT&T Cingular Flip™ 3 | AT&T Wireless

Learn about Device Assembly on the AT&T Cingular Flip™ 3 | AT&T Wireless


Device Assembly. Remove Battery: With the device
face-down and closed, remove the back cover by inserting your
thumbnail into the notch on the bottom left of the back
of the device and lifting up. To remove the battery, gently pull from the notch
on the top of the battery. Remove or Insert SIM: If a SIM is not in the device, the Missing SIM icon will
display in the Notification bar. Insert the Nano SIM card
into the SIM slot with the metal
contacts facing down and the notched edge
going in first. Push until it is
all the way in. To remove, press down on the tab to the right of
the SIM card slot, then slide it out. Remove or Insert SD Card: For additional storage, insert an optional Micro SD card
up to 32GB into the device. With the back cover
and battery removed, slide the Micro SD card
into the Micro SD card tray, with the gold
contacts facing down and the notched edge
going in first. Push until it is
all the way in. To remove, press on the tab to the left of the
Micro SD card slot, then slide it out. Insert Battery: Place the battery
in the battery slot with the gold contacts
on the battery lined up with the gold
contacts on the phone. Place the cover on the
back of the phone and gently push in until
the cover clicks. The cover should be flushed
with the rest of the device. ♪AT&T jingle♪

Leave a Reply

Your email address will not be published. Required fields are marked *